How to Use Your Xbox or Playstation Controller with All Your Gaming Devices                       

by Aqsa Ejaz
1 comment

To use your Xbox Series X Wireless Controller to navigate menus and play games, you must first link it with your newest Xbox Series X console. This procedure is incredibly straightforward and just involves a few button clicks to connect stuff so you can begin playing as quickly as possible. So you’ll need to connect to your Xbox Series X or S during the initial setup, you may also use it with your Smartphone or pc for Game Pass, remote play, and even Cloud Gaming.

Start by placing the batteries or rechargeable battery into your Xbox Series X connection, then pushing and holding the Xbox button till it reflects light, whether you’ve previously linked an Xbox Wireless Controller to a Gaming console, the method should be recognizable to you. Then, push and keep the Pair button on any Xbox Series X or S controller for 20 seconds till the Xbox button keeps flashing, then hold down the Pair button on your Xbox Series X controller for 20 seconds again until Xbox button glows brightly. That means it’s looking for your device, and the Xbox key should stay lighted for a while after that to prove it’s linked.

How to pair an Xbox series X controller with the PC?

To connect an Xbox Series X controller to a PC, ensure sure your computer and controller are both up to current. To turn your controller on, press the Xbox button, then hold it down the Pair button for three seconds before releasing it. After that, go to Start > Settings > Devices > Bluetooth and make sure it’s switched on, then select the Add Bluetooth or even other device choice. Mostly in Add a device screen, select Bluetooth, next allow for the Xbox Wireless Controller to show in the list of devices, so you’re good to go.

Pairing up with an android device

To link an Xbox Series X controller with an Android smartphone, ensure your controller is updated and your Android phone is running the most recent version of software. To turn on your gamepad, press the Xbox button, then hold the Pair button for 3 seconds before releasing it. Next, navigate to Apps > Settings > Connections > Bluetooth > Turn On on your Android device, simply select Xbox Wireless Controller from the list of possible Bluetooth devices. You’re ready to go once Linked shows beneath the Xbox Controller.

See also  What Makes the PlayStation 5 a Huge Improvement Over Previous Consoles 

Pairing up with an iOS device

To link an Xbox Series X controller with an iOS device, ensure that your controller has the most recent updates and that your iOS device is running the most recent version of windows. To begin, go to Settings > Bluetooth on your iOS device and confirm that it is switched on. Next, switch on your controller by pressing the Xbox button, unless it is already associated with an Xbox, in which case you should leave it off. Press the Pair key for 3 seconds and then drop it, then go to your iOS phone’s Bluetooth device list and choose Xbox Wireless Controller. Wait until the devices seem to be linked before proceeding.

How to connect Xbox with PC monitor?

You do not need to unhook wires if you want to enjoy a match that is not accessible on PC. Many recent displays include dual HDMI connections, providing access a PC and a PS4 to the same panel at the same time. Furthermore, PC monitors are ideal for gamers who enjoy FPS or other important games since they can react to gamer motions faster owing to minimal input latency.

Check out the BenQ EL2870U, which has two HDMI connectors as well as a Display Port. It also has an input latency of just ms.

If your screen has had an HDMI input, you may directly attach Xbox to your screen using an HDMI connection. If your monitor has founded speakers, the music will be played through those speakers via HDMI. Whether your monitor lacks built-in speakers, see if it has a sound signal. You’re in luck if your display includes a 3.5 mm stereo input. Any outside audio device can be connected.

See also  Here’s Why PS5 & Xbox Series X are Frequently Out of Stock

If your monitor does not have constructed speakers or headphone jack, employ other methods to retrieve sound that are more frequent on non-HDMI displays.


PS4 (PlayStation 4)

Navigate to the “Settings” tab.

Scroll down and click on “Network.”

Select “View Communication Link” from the drop-down menu.

Scroll down until you see the MAC address (LAN Cable) and MAC address (LAN Cable) (Wi-Fi). It’s worth noting that their MAC addresses are distinct. The MAC address (LAN Cable) refers to a data connection, whereas the MAC address (Wi-Fi) refers to a wireless network.

PlayStation 3

PS3 (PlayStation 3) (NOT compatible with the Fredonia wireless network)

Start the PlayStation 3 with no disc in the drive.

Click “Settings,” then “Network Settings” once the PlayStation 3 computer system has loaded.

From the “Network Settings” menu, select “Settings and Connection Status List.”

Under “MAC Address,” the address space will be revealed.

PlayStation 2

Turn on your PlayStation 2 and insert the Network Adaptor Startup Disc.

Select “ISP Setup” and hit X on your console after it has loaded.

The ISP Setup will start loading, and you will be prompted to accept a licence agreement. To proceed, choose Agree and hit X.

Select “Local Area Network (LAN)” as the connection type and click X to proceed.

To proceed, choose “Automatic Configuration” and hit X.

To proceed, pick “Advanced” and hit X on the connectivity test screen.

Make sure “Automatic” is chosen in the “Advanced Broadband Settings” screen. Take note of the Network interface at the top of this display while you’re at it.

Some PS2 videogames also have the capability of displaying your MAC address.

Nintendo Wii 

(NOT compatible with the Fredonia wireless network)

Select “Wii Settings” from the Wii Channel menu. (the round button in the bottom-left corner of the screen that says “Wii”) Select “Internet,” then “Console Settings.”

The Wii’s MAC address will be revealed on its first line.

Nintendo Wii U

Browse and pick the System Preferences application.

Scroll over to the Internet options and pick that if required.

Select “View MAC Address” from the drop-down menu.

The MAC address will be shown in the centre of the screen.

You may also like

1 comment

Twicsy June 24, 2022 - 1:39 pm

We are a group of volunteers and opening a new scheme in our community.
Your web site offered us with valuable info to work
on. You’ve done a formidable job and our entire community will be grateful to you.


Leave a Comment